X-TREME FLAT FINISH CLEAR COAT
Quart kit includes: 1 quart of Xtreme Flat Finish Clear Coat, 1 half-pint of hardener.
“FLAT FINISH” KLEAR is a matte finish clearcoat designed to offer that
very popular Old School, no gloss look when used over any color basecoat
paint, while offering the UV protection and durability of a standard
clear coat finish.
Apply basecoat as per manufacturer’s mixing and application instructions. Allow sufficient flash times before applying #5165 Xtreme Flat Finish Clear Coat. Inadequate flash time will affect the performance of the clear.
MIXING RATIO (6:1):
Mix 6 parts #5165 FLAT FINISH Klearkote to 1 part #5187 Activator.
Apply 2 even coats at 40-50 psi or (6-10 psi when using HVLP at the gun), allowing a 10-15 minute flash between coats.
NOTE:Wet coats will produce more gloss.Drier coats will produce a flat finish. Uneven coating can produce varied gloss levels in the finish.
|DRY TIMES AT 77° F: |
||10 - 15 minutes |
||45 minutes |
||16 - 24 hours |
|FORCE DRYING: |
|Flash Time @ 77° F
||15 minutes |
|Bake Time @ 140° F
||30 minutes |
|Allow a one to two hour cool-down time before wet sanding or buffing after force drying.|
#5165 may be recoated after a 24 Hour dry at 77° F, or upon cool down after force drying at 140° F for 30 minutes.
Pot life will be about 4-5 hours at 77°F.
Due to the California Rule Clean Air Act, we can only ship aerosol spray cans of automotive paint and clear coats to California. You can order matte clear coat in an aerosol.
Here is a link to our Spray Max Clearcoats in aerosols. Spray Max Clear Coats in Aerosol